HowTo: MOC Tutorials

Bloodarchmage · January 23, 2018, 10:28am

thanks i think i should start again and could you tag me if you finish it? bionicle worms are so rare i’m not that confident in my ability because i don’t practice it as much as i used to and i was still making bad ones then

Khalsa721 · January 25, 2018, 12:30am

I had posted a design here for a shapeshiting elemental weapon using basic joints and on a whim today I decided to upgrade that design.

And just use however many of these joints you want

Optional but that inner pin can be used to add a filling

TridahkMaster · January 27, 2018, 8:48pm

Does anyone have a vague ribcage for ccbs? I’m trying to make a skinny moc. No, it’s not a self moc.(it’s funny because only people who know me in real life would get it)

KAI_BORG · January 27, 2018, 8:59pm

Ummm… Only ways I know how to partially make something like this is using either the lego skeleton/robot arms or the phantoka makuta rib-cage.

Abyss_Lockstrider · January 27, 2018, 9:47pm

does any one have tips for titan scale builds it would be very helpful

i know how to build a rib cage just look at this moc i made click this

Sabretooth · January 29, 2018, 3:11am

Does anyone have any ideas for a good Toa sized Spartan helmet from Halo? I can never seem to get it right.

ThatGuyAtTheEndOfTheRoad · January 30, 2018, 7:36pm

I don’t know you in real life but I fully get it.

Bloodarchmage · January 31, 2018, 1:08am

blu tack the face of a ignika congu head

KAI_BORG · January 31, 2018, 1:57am

Ummm… well I don’t know how to make one myself but I do have links to a couple of good references (which you could possibly reverse engineer… possibly).

(None of the below are mine)

Also! If you want a simple design there’s also this one:
(can’t find the links, sorry)

Sushiyoda · February 4, 2018, 7:54am

Any ideas for custom arms and legs for this guy? Looking to make him a little bit taller, and have his arms be more proportionate.

Bloodarchmage · February 7, 2018, 7:40pm

i finally solved my own problem
here is the part i need

the circles have 6 and are connected to female - female bones

TridahkMaster · February 8, 2018, 7:26am

*Peers out over shoulder.
Can I use it?

Bloodarchmage · February 8, 2018, 10:03am

yes you can
i want more worm mocs

Jakanader · February 8, 2018, 10:42pm

This is a very heavily modded version of a foot made by @1000Purse30.
The actual foot.

All the parts.

For this last step, make sure you wiggle around the CCBS shell until everything is firmly in place.

Bloodarchmage · February 11, 2018, 11:06am

anybody think the mask for it look like a samurai mask? hint hint

Runa · February 11, 2018, 7:34pm

It could theoretically be used as a samurai or Oni mask. What kind of connection does it have?
Also, does anyone have a custom torso about the size of an Okotan?

Bloodarchmage · February 11, 2018, 9:32pm

thought it might be a nice piece use

Morgy · February 13, 2018, 1:38am

I do, it uses some technic and system though.

Runa · February 13, 2018, 2:37am

That’s probably fine

Morgy · February 13, 2018, 2:54am

The mata hand can easily be switched out for a hordika neck or the like.

The silver CCBS shell is a stand.
If you need more pictures just ask.