BIONICLE Canon Contest #2: Meet the Maker

[Hawkflight]

It’s probably harder for people to both build a titan and have the majority of the MOC be one shade, assuming they have enough of one shade of green to work with.

[TheJerminator]

Artakha is generally going to be a larger build. Also, it was known that Helryx was going to be the first contest for a while before it began, while there was a poll for the second one.

[Solaris_Magnus]

Easier in general to make a Toa Design, especially one described as extremely frail and having no armor. Alot fewer restrictions Helryx as well (for better or for worse ._.).

I’d say we’ll probs see somewhere in the 40-60 range for entries this time round.

-Solaris Magnus

[T4k4nuv4]

I’m trying to link my contest entry here, how do I do that?

[Solaris_Magnus]

Just copy paste the url link to your topic, and then paste the link here!

-Solaris Magnus

[T4k4nuv4]

Thanks!

Here’s my entry!

Artakha, master of the forge (meet the maker contest entry)

Hello everyone! This is my contest entry for the meet the maker artakha building contest, hope you all like it! Entry photo: [IMG950495] Front: [IMG950490] Side: [IMG950492] Back: [IMG950494] Breakdown: [IMG950496] I had a ton of fun building this guy (a couple months ago at this point). My brother told me about this contest and I thought it would be cool to try my hand at it. I chose a few initial characters to build. When I found out which artakha was, I immediately knew I had to build him, so I started researching and I think I did a pretty good job of capturing his character. I doubt I’ll make it far, but you never know!

EDITED FOR DOUBLE POSTING - Spiderus Prime

[Sabretooth]

At long last! Here’s my entry. Best of luck to everyone, this has been a blast!

Artakha: Primordial Maker (Canon Contest #2: Meet the Maker)

[image] [image] [image] [image] [image] Breakdowns: [image] [image] [image] [image] [image] [image] [image] [image] [image] This was a ton of fun to make over the last few months of quarantine! It was an incredible challenge to scrounge up all of this sand green and have it fit together cohesively. I took a lot of inspiration from Optimus Prime for the frame, because I always imagined Artakha having a similar demeanor and voice to the Autobot leader.

[Eljay]

@Connor_Hoffman

Regarding Painting 3D Printed Masks, do they have to be all one shade or, since they’re placeholders, can we paint them multiple (at least 2) colors?

One shade.

[Turaga_of_Force]

@Eljay

He does not and never did wield the Staff of Artakha. If you include the Staff, your entry will be disqualified.

Not true. He created it. Surely he held it upon creating it.

[Propulsion]

Yes but did he wield it.

[Sharnak]

He did weld it. Close enough, right?

[republicbuilder]

I’m throwing in my Artahka build into the run, I hope people like it.

Artahka, Humble Creator (Canon Contest #2 - Meet the Maker)

At the recommendation of a few redditors and Instagram followers, I am here with my entry to the contest. The design for Artahka was started with the mask, and branched outward. I know gold isn’t canon, but I thought it looked regal. His hammer was designed to be lackluster, something he would have grabbed out of need. His build is influenced by many of the titans who are in the OOMN, thighs and arms from Axonn, shins and feet (somewhat) from Brutaka, and spine from Umbra. He isn’t the biggest and most intricate, but like most characters behind the scenes, who is? Thank you to everyone for the kind words and support getting me to enter. Front: [20200911_111408_HDR] Side: [20200911_111424_HDR] Back: [20200911_111433_HDR] Entry shot: [20200911_111639_HDR] Mask designed by KhingK: T…

[Propulsion]

I’m going to say no…

[Solaris_Magnus]

Weld, wield…tomato, tomahto…XD

-Solaris Magnus

[Toa_Good_Guy]

Artahka, Smith of Legend (Canon Contest #2 - Meet the Maker)

This is my entry to the Artahka round of the canon contest. Initially, I wasn’t going to partake in this round but then I said “screw it” and whipped up something as fast as I could while making it look good. So here it is. [Artahka, The Smith of Legend] [Artahka frontview] [Artahka backview] [Artahka forges the avohkii] He has one massive smithing hammer and tongs to pull masks and armor out of his forge. He uses a modified kikanalo torso and the legs and arms are, something? His feet are mata feet slapped on top of some liftarms with a gunmetal grey Hau on the front. A lot of these parts don’t come in these colors in real life and if you were to build him he would not be very stable when standing up. Mask by KhingK The Legendary Mask of Creation by KhingK - Thingiverse The s…

Here is my entry into the contest. Hope y’all enjoy yourselves!

[The_Marvel_Master]

@Eljay

Here is my moc contest entry, hopefully it qualifies!

Artakha Moc Contest Entry, (Canon Contest #2: Meet the Maker)

I attempted that at first, but it fits together much easier this way, I personally think it helps to spread the gold on the torso more evenly, especially with the shoulder pieces, but thanks for the interest!

[Godfyr6934]

Bionicle canon contest 2 meet the maker

Heavily based on pre-mutation Karzhani. Mask is KhingK’s [Artahka] [ArtahkaFront] [ArtahkaSide] [ArtahkaBack] [ArtahkaLeg] [ArtakhaSpine] [ArtahkaShoulder] [ArtahkaBird] [ArtahkaChest] [ArtahkaHammer] Stud.io File https://drive.google.com/file/d/1hdlyDsmBOclUJr6LJnnpBaA0FSjDgGqs/view?usp=sharing KhingK’s Mask of Creation The Legendary Mask of Creation by KhingK - Thingiverse And his Stud.io pack 39.03 MB file on MEGA

[Pakari]

@Sharnak

He did weld it. Close enough, right?

You beat me to the joke.

[Sabretooth]

I’m really happy to present my new entry, Spheretakha.

Reject your fear, and become sphere.

Just kidding

[Ocean_Man98]

Here’s my entry!

Artakha the Architect (Canon Contest #2: Meet the Maker)

[20200912_190536] And here’s my entry to the Artakha canon Contest! [20200912_184315] (Front view) [20200912_184417] (Side view) [20200912_184546] (Back view) And also these are breakdown pose pics: [20200912_185159] [20200912_190113] “None of us choose our destiny. And none of us can defy it.” So today I finished building my Arthaka MOC for the second Canon Contest! So I’d like to show my interpretation of the Maker himself. I used mismolded golden kanohi Kraahkan to represent the G1’s Mask of Creation. And also Hero Factory shields are used to resemble some kind of armor with some ancient symbols. And that’s it! I wanted to say good luck to anyone who participates in the contest!