BIONICLE Canon Contest #2: Meet the Maker

[Sharnak]

He did weld it. Close enough, right?

[republicbuilder]

I’m throwing in my Artahka build into the run, I hope people like it.

Artahka, Humble Creator (Canon Contest #2 - Meet the Maker)

At the recommendation of a few redditors and Instagram followers, I am here with my entry to the contest. The design for Artahka was started with the mask, and branched outward. I know gold isn’t canon, but I thought it looked regal. His hammer was designed to be lackluster, something he would have grabbed out of need. His build is influenced by many of the titans who are in the OOMN, thighs and arms from Axonn, shins and feet (somewhat) from Brutaka, and spine from Umbra. He isn’t the biggest and most intricate, but like most characters behind the scenes, who is? Thank you to everyone for the kind words and support getting me to enter. Front: [20200911_111408_HDR] Side: [20200911_111424_HDR] Back: [20200911_111433_HDR] Entry shot: [20200911_111639_HDR] Mask designed by KhingK: T…

[Propulsion]

I’m going to say no…

[Solaris_Magnus]

Weld, wield…tomato, tomahto…XD

-Solaris Magnus

[Toa_Good_Guy]

Artahka, Smith of Legend (Canon Contest #2 - Meet the Maker)

This is my entry to the Artahka round of the canon contest. Initially, I wasn’t going to partake in this round but then I said “screw it” and whipped up something as fast as I could while making it look good. So here it is. [Artahka, The Smith of Legend] [Artahka frontview] [Artahka backview] [Artahka forges the avohkii] He has one massive smithing hammer and tongs to pull masks and armor out of his forge. He uses a modified kikanalo torso and the legs and arms are, something? His feet are mata feet slapped on top of some liftarms with a gunmetal grey Hau on the front. A lot of these parts don’t come in these colors in real life and if you were to build him he would not be very stable when standing up. Mask by KhingK The Legendary Mask of Creation by KhingK - Thingiverse The s…

Here is my entry into the contest. Hope y’all enjoy yourselves!

[The_Marvel_Master]

@Eljay

Here is my moc contest entry, hopefully it qualifies!

Artakha Moc Contest Entry, (Canon Contest #2: Meet the Maker)

I attempted that at first, but it fits together much easier this way, I personally think it helps to spread the gold on the torso more evenly, especially with the shoulder pieces, but thanks for the interest!

[Godfyr6934]

Bionicle canon contest 2 meet the maker

Heavily based on pre-mutation Karzhani. Mask is KhingK’s [Artahka] [ArtahkaFront] [ArtahkaSide] [ArtahkaBack] [ArtahkaLeg] [ArtakhaSpine] [ArtahkaShoulder] [ArtahkaBird] [ArtahkaChest] [ArtahkaHammer] Stud.io File https://drive.google.com/file/d/1hdlyDsmBOclUJr6LJnnpBaA0FSjDgGqs/view?usp=sharing KhingK’s Mask of Creation The Legendary Mask of Creation by KhingK - Thingiverse And his Stud.io pack 39.03 MB file on MEGA

[Pakari]

@Sharnak

He did weld it. Close enough, right?

You beat me to the joke.

[Sabretooth]

I’m really happy to present my new entry, Spheretakha.

Reject your fear, and become sphere.

Just kidding

[Ocean_Man98]

Here’s my entry!

Artakha the Architect (Canon Contest #2: Meet the Maker)

[20200912_190536] And here’s my entry to the Artakha canon Contest! [20200912_184315] (Front view) [20200912_184417] (Side view) [20200912_184546] (Back view) And also these are breakdown pose pics: [20200912_185159] [20200912_190113] “None of us choose our destiny. And none of us can defy it.” So today I finished building my Arthaka MOC for the second Canon Contest! So I’d like to show my interpretation of the Maker himself. I used mismolded golden kanohi Kraahkan to represent the G1’s Mask of Creation. And also Hero Factory shields are used to resemble some kind of armor with some ancient symbols. And that’s it! I wanted to say good luck to anyone who participates in the contest!

[TheRocketRacer]

Honestly I think the small “controversy” with how people feel about these contests are kind of ridiculous. No matter what, nobody will be pleased with every model that gets selected. Nobody is going to satisfied with every single Bionicle set or Lego set in-general. We need to appreciate the fact that we’re even getting this opportunity again.

Like I said, if you don’t like a design, then that’s fine. Nobody said you have to agree with whichever one gets picked. But it’s best not to just go on and continuously whine about it. Complaining and just being a nuisance does nothing but ruin the fun for everyone and makes everybody else’s day a lot harder, especially everyone at TTV.

Hey so, I also have a question if you guys don’t mind. This is going to be for the rest of the people participating since I’m sitting out of this, but I just wanted to make sure…

Are pieces from Slizers/Throwbots & Roboriders allowed, or will it depend?

[Eljay]

@TheRocketRacer

Are pieces from Slizers/Throwbots & Roboriders allowed, or will it depend?

Yes. They’re allowed. We don’t have a restriction on Technic.

[TheRocketRacer]

Alright, thanks for letting us know!

[Solaris_Magnus]

@TheRocketRacer

Honestly I think the small “controversy” with how people feel about these contests are kind of ridiculous. No matter what, nobody will be pleased with every model that gets selected. Nobody is going to satisfied with every single Bionicle set or Lego set in-general. We need to appreciate the fact that we’re even getting this opportunity again.

Like I said, if you don’t like a design, then that’s fine. Nobody said you have to agree with whichever one gets picked. But it’s best not to just go on and continuously whine about it. Complaining and just being a nuisance does nothing but ruin the fun for everyone and makes everybody else’s day a lot harder, especially everyone at TTV.

This. So much this. All the negativity from the last contest and the baseline negativity from this one really detract from the contest. Some people love certain official sets, others dislike them (E.g. I love the Piraka and 06, a certain TTV member doesn’t XD). Its going to be innevitable with MOCs in the contests that some might not be your fancy. That’s fine. What’s not fine is constantly complaining that the contests exist, or bashing MOCs cause they don’t fit your standards. Lets all have fun with this contest and enjoy an opportunity to bring a depiction to characters, frankly, we never were going to!

-Solaris Magnus

[Rothanak]

Here’s my entry:

Imagining Artahka (Meet the Maker) canon contest 2

Here is my entry for the Artahka canon contest. I started with the mata torso turned sideways and worked outwards from my spare parts bin. The green lego bricks are mean to represent surfaces that could have runes carved onto them along with any other free surfaces on the armor. Main pose: [IMG_5604] Front: [IMG_5601] Side: [IMG_5600] Back: [IMG_5597] Breakdown: [IMG_5613] Other poses: [IMG_5602] [IMG_5605] [IMG_5608] [IMG_5609] [IMG_5611] Thank You.

[Bodi]

My entry for artakha contest.
I hope I am doing this right.https://board.ttvchannel.com/t/artakha-contest-entry-meet-the-maker/55695

[REZO-MOCS]

This is my entrie to the contest “Meet the Maker” Canon Contest for Artakha

[Album] "Meet the Maker" TTV contest

Can Someone tells me how link it to the top list

[Jojo_da1]

Aren’t the g1 and g2 heads similarly sized?

[REZO-MOCS]

I hope my entrie is good like this

"Meet the Maker" TTV Bionicle Artakha Contest

This is my entrie to the contest. Hope you gus like it. As Eljay asked, I remove the Paint of the mask, then he is just grey. [Album] "Meet the Maker" TTV contest ["Meet the Maker" TTV contest] [20200915_105338]

[Wolk]

@REZO-MOCS

I hope my entrie is good like this

This is the correct way to post it, yup.

@Jojo_da1

Aren’t the g1 and g2 heads similarly sized?

They are indeed. He might meant to be referring to the usage of the mask rather than the head?