Levva
July 28, 2017, 8:34pm
1380
I dont Moc that much, but today I was playing around with some pieces when I came up with this custom mask.
You’ll need these pieces. Any color will work.
Just add a hand and you’re done!
It looks cool on MOCs too.
You can use it if you want. You don’t have to credit me but you can. If anyone’s done this before please tell me. Toodles!
10 Likes
Stuubh
July 28, 2017, 10:35pm
1381
Very simple, but I kinda like it. Maybe use the brown one and get a cool tribal mask.
3 Likes
Levva
July 29, 2017, 1:05am
1382
Thanks for the suggestion! I would try that, but I don’t have brown Rahkshi feet. Is there a site that you can buy BIONICLE/Technic parts on?
2 Likes
Bricklink is a good place
2 Likes
Levva
July 29, 2017, 1:41am
1384
Thanks! it is time to brick all the links!
3 Likes
Gilahu
July 29, 2017, 9:35am
1385
Here’s a tutorial for the Okotian custom torso which I used on my new Harvali MOC as requested by @Morgy :
Note that there are two types of the normal length 2 pins - ones with thick sides and ones with thin sides. You can only put a bar inside the ones with thin sides.
This torso is one unit longer than a Protector torso.
That’s it, hope you find it useful!
24 Likes
Levva
July 31, 2017, 3:28am
1387
Yesterday, I was designing a virtual MOC when I made this custom torso.
Here are the parts that you’ll need (Any of them can be color swapped, and the 5-long axle is never used.)
First, the upper torso.
Time for the lower torso.
Now just put it on the upper half and the frame is complete!
Now you can use CCBS or custom parts to make look how you want!
If you want to put G2/Glatorian heads on, just take a 2-long axle and two balljoints and put them together.
That’s it for now! Feel free to use this in your MOCs, and if anyone has made something very similar to this please tell me. Bye!
22 Likes
Hmmm, i might try to do a how to of the complicated parts of my self moc here. Its mostly small technic pieces mushed together to create a solid piece. It looks really good tho.
And this is without armor.
If you want a how to then i want atleast 10 people asking for it.
I have a very bad memory so i might put it back together wrong
Oh yea, this is not the current version. The arms have changed a bit.
7 Likes
You could always take pictures as you’re taking it apart, and just follow your own instructions on how to put it back together again.
6 Likes
Ivan
August 1, 2017, 10:54pm
1390
May i use that head design?
1 Like
Alright this is an arm build I used in a previous MOC topic of mine and its kinda easy to build. It’s better used for bigger MOCs but uh… I don’t really care on what you do with them XD.
I’m just gonna do one arm cause they’re just the same build and I’m kinda lazy.
Ya need these.
(You squeeze them together and make sure the axle is sticking out on both sides)
(Comnect the part I made earlier like this)
(Then flip it over and add this piece)
(Now bend it at a 90 degree angle and add those 2 pins)
(Now add this technic piece and flip it over so that the technic parts are pointing to your right)
(Now push that part in and do the same steps to make another arm)
(Connect the other arm on)
(Then add a CCBS torso if you want, it’s optional. Then just add some armour)
And you done son!
6 Likes
Ghid
August 3, 2017, 2:48pm
1394
Timageness:
Update: Wasn’t able to do so. Sorry folks.
I did manage to transfer it over onto the hard drive of my PS3, though, so I can send it out to a staff member via email if one would be kind enough to edit it in, but it’s probably not going to happen otherwise
you could um
semd it to someone on Discord and they could fix it for you
maybe
4 Likes
Well, hey, man, if you’re offering…
2 Likes
Im making pohatu and gali using lalam24 build, but don’t know where to start, any suggestions?
1 Like
_el
August 9, 2017, 4:28am
1397
@Samtastictogo has instructions in above posts.
1 Like
I already got them but I need a build specifically for gali and pohatu
1 Like
Levva
August 9, 2017, 7:12pm
1399
Here’s a torso build I created yesterday for anyone who wants to… I dunno.
Here are the pieces you’ll need. None of the colors need to be like they are here. Also, the weapon pieces aren’t used.
<img src="/uploads/db5640/original/3X/5/3/539bfcc016c31993dc8c3ee8caccbab882383413.JPG" width=“666"src=”/uploads/db5640/original/3X/a/f/afcd8b1a04296685e44039d166c1f74db8da3016.JPG" width=“666” height=“500”>
Now flip it over.
The frame is done! Now you can add what you want to make it your own!
You might be wondering how I put on that Hordika chestplate.
Now just attach it to the CCBS chestpiece!
Thats if for now!
~Levva
15 Likes
Fidda
August 10, 2017, 5:31pm
1401
Timageness:
Update: Wasn’t able to do so. Sorry folks.
I did manage to transfer it over onto the hard drive of my PS3, though, so I can send it out to a staff member via email if one would be kind enough to edit it in, but it’s probably not going to happen otherwise.
so… were you on a phone or what?
1 Like