BIONICLE Canon Contest #2: Meet the Maker

Galva_Nize · September 23, 2020, 4:53pm

Almost forgot I had to post this here

Peritus_Engineer · September 23, 2020, 7:01pm

It’s going to be really hard to decide between these, but I’ve already narrowed it down to only 21 entries!

Makuta_Luroka · September 23, 2020, 7:04pm

I have created my entry here.

TheJerminator · September 23, 2020, 7:32pm

Honestly, I’d be okay with a majority of these entries.

But as for the ones that I really want to win, I have it down to a top five or six.

Toa_Gua · September 23, 2020, 8:53pm

Forgot to post it here as well! Phew, here you go
https://board.ttvchannel.com/t/artakha-hammer-of-the-gods-canon-contest-2-meet-the-maker/55922/18

VelociJACKtor · September 23, 2020, 9:18pm

Here is my entry

Hazash · September 23, 2020, 10:21pm

Cutting it a bit close to the deadline, but here’s my boi.

udime123 · September 23, 2020, 10:34pm

Hello! I’m new to the boards but I’ve been a part of the community for a while and have been really looking forward to this contest in particular! Here’s my entry!

Artakha, The One Who Creates (Contest #2: Meet The Maker) Lego Creations

[Imgur] Here’s my take on Artakha. For some reason the idea of his armour looking unusual made me really want him to have some strange System armour. I put some jets on his hammer since that seems like the sort of thing he’d like. Forging a legendary Kanohi probably requires an excessive amount of power, so I like to imagine him swinging down with full thrust to pound his creations into shape. [20200923_143642] Here’s his back. I gave him side skirts to give him a wise Turaga-esque appearance. [20200923_143912] From the side, you can see the bulkier parts of the system armour that wraps around his waist a bit. I added some gold grills for that “unusually ornate” flair. [20200923_143612]Here’s an unobstructed front profile. Breakdowns [20200923_14…

ShadowVahki · September 23, 2020, 11:06pm

Here’s my Entry:

https://board.ttvchannel.com/t/artahka-ancient-master-of-the-iron-forge-canon-contest-2-meet-the-maker/55978

Haebels · September 23, 2020, 11:52pm

“Another One” - Dj Khalid

Artakha, Creator of the Toa Mata (BIONICLE Canon Contest #2: Meet the Maker) Lego Creations

Entry Photo: [20200923_223350] We know. We know… Dark Turquoise/teal is a risky take on Artahka because he is described as Gray-green. But hear us out: Turquoise is just a nuance of blue and green, so technically it is up to your interpretation of the Colour green, although some Cultures describe Blue through Green and often used one Word for both. Besides that, we sadly didn’t have much Sandgreen Pieces on hand and didn’t want to throw our Creation in Studio and give it some Impossible Pieces. Which would look cool and more accurate but wouldn’t be acquirable. Just in Case we would somehow win against these other incredible Contestants, we wanted our Build to be Reproducible. On the Optic aspects, we didn’t want to let it look like a Ben 10 Figurine, Gen 2/Hero Factory Model or a…

chasekristianj · September 24, 2020, 1:13am

Entry post: Artakha, the Creator (Canon Contest #2: Meet the Maker)

TheBrickBrain · September 24, 2020, 1:35am

I fixed my entry so now it should fulfill all the requirements:

Artakha; Brother of Karzahni (Canon Contest #2: Meet the Maker) Lego Creations

Gathered friends, I am here today to enter my submission for the Meet the Maker Contest. Let me introduce my rendition of the wearer of the Mask of Creation himself, Artakha! Entry Photo: [Artakha3_pose] “Artakha is a powerful being from the Matoran Universe, the “brother” of Karzahni, and the ruler of the island realm of Artakha, named after him.” Given that he is the brother of Karzahni, that tidbit went heavily into my design process, for I based his entire torso around the Karzahni set, with some obvious modifications to account for the whole “Karkahni being a mutated freak due to the pit” situation. I also wanted to create a model that utilized actual Sand-green pieces so that one might be able to build it. Obviously this is a digital model, and that’s because I don’t want to spe…

TheThirdOlmak · September 24, 2020, 4:34am

Here’s my entry, hope it qualifies.

Artakha, the wise and imposing (Meet the Maker) Lego Creations

So I decided to take a crack at this contest, made my build of Artakha using dark green pieces, since I barely have any sand green, nor the disposable income to order parts at this time. His hammer isn’t that large compared to him, since I figured his hammer is a tool first, weapon second. No mask, because I couldn’t find or build one for him if I tried, and the art contest will take care of that anyway. This figure has an ab crunch, and rubber stabilizers in his feet. [Artakha (01)] [Artakha (02)] [Artakha (03)] [Artakha (04)] [Artakha (05)] [Artakha (06)] [Artakha (07)] [Artakha (08)] [Artakha (09)] [Artakha (10)] Breakdown pics [Artakha Breakdown (01)] Note: The rubber piece in each foot is located towards the center where the two 3 length grey axles don’t appear…

Jathru_Cranli · September 24, 2020, 5:35am

Question to those using Stud.io:
Is the color “Gunmetal” called “Chrome Black” in Stud.io?

Artakha_The_Creator · September 24, 2020, 5:35am

Here’s the link to my entry!

Artakha, Lord of Creation (Meet the Maker) Lego Creations

[IMG_5888] Greetings All! I present to you Artakha, the Lord of Creation. I went for an ancient but powerful, lean but strong, and wise but dangerous, look. I used a lot of the Metru Armor for the ancient look, and the beefy but well proportioned limbs that give him the powerful and imposing aesthetic. [IMG_5887] I based the warhammer heavily off of the one created to go with the Melding Universe Teridax created by [BZPower] member ToM Dracone. According to the Bionicle wiki, the canonical users of this Warhammer are melding universe Teridax and Artakha. As I could not find instructions, I did my best to imitate it. [IMG_5880] In reading Artakha’s description, I always perceived ‘gray-green’ as gray AND green, but even so I knew that his canonical color was sand green. Thankf…

StudentScissors · September 24, 2020, 5:38am

Quick question:

How soon after this topics closure can we expect voting to begin?
Sorry if this has already been answered.

toaskello · September 24, 2020, 5:47am

It’s Pearl Dark Gray.

SubParFauxPas · September 24, 2020, 11:32am

Here’s mine:

Artakha [Canon Contest #2: "Meet the Maker"] Lego Creations

Entry Photo: [image] …when he traveled to Metru Nui, he took along a hammer from his forge to use as a warhammer. - BS01 A war hammer is quite a bit different to the type of hammer used for smithing, so if the tool he wields was truly supposed to be a war hammer and a smithing hammer, I chose to interpret it as one from his forge that he’s modified into a more specialized weapon by extending the handle, rather than having always used a war hammer for his profession. [image] [image] I was turned to the idea of a copper coloured Mask of Creation after seeing @Votuko’s post. [image] Side: [image] Back: [image] Front: [image] Breakdown photo album: Artakha Breakdown Pics - Album on Imgur

Keplers · September 24, 2020, 1:12pm

Fifteen hours, fellas. Get your hotheaded opinions ready and prime your uncreative ad hominems! I expect this to be a fair and fun contest that’s not taken too seriously, but in the absence of that, just make sure you aim for a vital organ!

Ghid · September 24, 2020, 1:50pm

please I have no experience in swinging blindly

you must teach me the way to make an utter fool of myself