BIONICLE Canon Contest #2: Meet the Maker

Solaris_Magnus · September 21, 2020, 4:00pm

Assuming entry guidelines are the same for the MOC to Art portion, you’d post your art with (Meet the Maker) somewhere in the title, and then link your post to the main topic for the art contest.

-Solaris Magnus

Propulsion · September 21, 2020, 4:02pm

Of course the art contest hasn’t started yet so you have a bit of a wait ahead of you.

B3njix · September 21, 2020, 5:40pm

oh OK thanks a lot

Darknova3529 · September 21, 2020, 9:19pm

Arthaka - The Burning Forge (Bionicle Canon Contest #2: Meet The Maker) Lego Creations

[2020-09-21 19-54-19 (C,Smoothing4)] Here is my take on Arthaka. I started the moc with the midriff forge section. The rest of the design followed after that. The Giant gear on the back is connected to a gearbox that moves the right arm. The hammer was designed to have some kind of oven inside of it. [2020-09-21 19-41-34 (C,Smoothing4)] [2020-09-21 19-39-43 (C,Smoothing4)] [2020-09-21 19-44-03 (C,Smoothing4)] [2020-09-21 19-46-26 (C,Smoothing4)] Stud.io INSTRUCTIONS DOWNLOAD Some parts are slightly misaligned and some parts are missing due too the limitation of the program. My interpretation for the Mask of Creation [image] [2020-09-21 19-30-58 (C,Smoothing4)] [2020-09-21 19-53-18 (C,Smoothing4)]

GreenToaTavohk2 · September 21, 2020, 10:03pm

Hello, here is my Artakha entry: My Artakha MOC contest entry (BIONICLE Canon Contest #2: Meet the Maker)

KirbyLoreEnthusiast · September 22, 2020, 2:49am

Here is my entry:

Artakha the Creator (Canon Contest #2: Meet the Maker) Lego Creations

Here is my entry for the second canon contest. He appeared to be ambivalent to the events of the world, creating artifacts of both light and darkness, and also isolating his domain from the outside world. Entry Photo: [20200916_142908] I wanted to make him highly armored, and tried to make some unique shaping in his design. He has some oddities about his appearance such as slightly haunched legs, clawed hands, and exposed ribs. Being that he and Karzahni are unique creations of the Great Beings, and early ones at that, I think there could be some “otherness” and prototyping to his look. For example: prominent pistons in his abdomen and legs and cables running up his spine. For his hammer I went the route of classic Bionicle design, and just put an absurde amount of pistons on it. For …

Toa_Ori · September 22, 2020, 2:50am

Ok, but how do I do that? I’m a noob, so I don’t know anything.

Propulsion · September 22, 2020, 2:54am

Highlight your topic’s URL.

Right click and press “Copy”.

And then when replying click on the chain icon, then right click and press “Paste” into the first box.

Then click “OK” and your all set!

Connor_Hoffman · September 22, 2020, 6:29am

Finally made it! Here’s my entry:

Order of Mata Nui Files #37: Artakha, The Originator Lego Creations

← Previous OoMN Files --------------- Next OoMN Files → I’m editing this page into one of my typical OoMN Files posts for consistency’s sake, don’t worry, the original, unedited contest entry topic is hidden just below this text.
Original contest post for archivial purposes
Finally, after having this MOC complete in every way except for colors for the last 2 weeks, I’m entering my Artakha! Entry Photo: <a class="lightbox" href="https://board.ttvchannel.com/uploads/db5640/original/4X/1/7/5/17503d0a0ab54bbf1a59db0b6a3cd688cc4da430.jpeg" data-download-href="https://board.ttvchannel.com/uploads/db5640/17503d0a0ab54bbf1a59db0b6a3cd688cc4da430" title="ArtakhaContest (3)">[ArtakhaContest (3)]</a> I tried to stick to detailed, G1-style par…

Kito472 · September 22, 2020, 7:48am

My Entry

TheBrickBrain · September 22, 2020, 2:09pm

This is the ring, right? Welp, here’s my hat! Best of luck to everyone!

Artakha; Brother of Karzahni (Canon Contest #2: Meet the Maker) Lego Creations

Gathered friends, I am here today to enter my submission for the Meet the Maker Contest. Let me introduce my rendition of the wearer of the Mask of Creation himself, Artakha! Entry Photo: [Artakha3_pose] “Artakha is a powerful being from the Matoran Universe, the “brother” of Karzahni, and the ruler of the island realm of Artakha, named after him.” Given that he is the brother of Karzahni, that tidbit went heavily into my design process, for I based his entire torso around the Karzahni set, with some obvious modifications to account for the whole “Karkahni being a mutated freak due to the pit” situation. I also wanted to create a model that utilized actual Sand-green pieces so that one might be able to build it. Obviously this is a digital model, and that’s because I don’t want to spe…

Square · September 22, 2020, 3:49pm

h

Smokeybobo · September 22, 2020, 3:59pm

Hey all, here’s my entry!
https://board.ttvchannel.com/t/artakha-demigod-of-creation-bionicle-canon-contest-2-meet-the-maker/55918

ToaSohcah · September 22, 2020, 4:05pm

Artakha the Smith (BIONICLE Canon Contest #2: Meet the Maker) Lego Creations

Here is my version of Artakha for BIONICLE Canon Contest #2: Meet the Maker. Entry: [image] Here is Artakha hard at work forging the Hau Nuva. Front: [image] Artakha giving a wave to his adoring fans. Side: [image] Flexin’ those 'ceps! Back: [image] Hammer: [image] Arm and Hand Breakdown: [image] Leg Breakdown: [image] Torso Breakdown - Front: [image] Torso Breakdown - Back: [image] When I think of Artakha, I think of a blacksmith, so I tried to bring that to life by giving him a large upper body and muscular biceps while keeping the rest of him fairly thin. While I really liked the idea of using the Tohunga arms for muscles, I’m not particularly happy with how the arms turned out. As for the mask, I think the ornamentation of the G2 Mask of Creation would b…

Steve_Steveson · September 22, 2020, 4:05pm

This is my entry

Artakha, G1 style build (Meet the Maker contest entry) Lego Creations

[Artakha Render Front] This is my entry for the Artakha contest. I wanted to design something that people wouldn’t need to paint parts to build. I also wanted to keep to the style of '06 - '08 Bionicle. I did need to use a unique elbow and forearm design to support the mighty weight of his hammer. I had thought of using a smaller hammer, but I just loved the shape and color of the UCS Batmobile wheels. It seemed natural for the Mask of Creation to also be gold in G1, seeing as other rare or legendary masks tend to gold until something bad happens to them. (Tarnished Vahi, mid-countdown Ignika, shadow leeched Avohkii) It also seemed fitting for the mask not to be only piece of gold on the build. I made sure the neck joint can easily be replaced with a socket to accommodate a Metru head.…

barraki124 · September 22, 2020, 6:33pm

Gilahu · September 22, 2020, 6:44pm

I didn’t originally plan to, but uh… well, guess it happened anyways:

Lord Artakha, Master of Crafts (Bionicle Canon Contest #2: Meet the Maker) Lego Creations

I didn’t plan to. I really didn’t. But after seeing all those early super buff Artakha’s I just couldn’t resist at least trying to provide an option that’s not super buff and more like what I imagine Artakha to look like. You probably all know know how sudden motivation sometimes is. Still, three weeks for this was kinda short, especially since I needed to order some parts from Bricklink as well. As such, maybe this MOC might not be perfection, but I at least managed to build something decent, I think. As per my personal rules, this MOC uses no painted parts, no 3D-printed parts and no CCBS parts. It is possible for everyone with access to only normal Lego parts, to build it exactly like this. This MOC does (probably?) use illegal techniques. Everything is at least connect…

Brick_Diamonds · September 22, 2020, 7:36pm

Entry Link:

Artakha, A Love Letter (Canon Contest #2: Meet the Maker) Lego Creations

[A1] {Entry Photo} I originally had no plans to enter this contest, but the excitement surrounding the entire event was too alluring to pass up on. Like many, Artakha has been one of my favorite characters in the franchise. The entries thus far have been amazing, with so many takes on his design! I took great time and care reading through carefully what you, the fans, wanted to see. Shape, color, qualities. And equally, what you all did not want to see brought to the character’s profile. I have read your comments, concerns, hopes, and all things in-between. While disagreements were scattered across here and there, this is the culmination of what I hope can create a middle-ground. Hoping I can honor all those wishes, so this love letter is for you all! Design/Influence: [A3] …

Senrab · September 22, 2020, 8:14pm

Here’s mine.
Artakha, King of the Forge (Canon Contest 2: Meet the Maker)

Kadator · September 22, 2020, 8:44pm

Here is my participation in the canon contest: Artakha, Governor of The Forge (BIONICLE Canon Contest #2: Meet the Maker)